2WD Arduino Car Kit
Very easy to install yet very capable. Build a remote controlled Arduino car or build an autonomous car that drives itself wherever it likes, it is all possible. The simple mechanical structure from laser-cut acrylic is sturdy and easy to install. The HC-SR04 sensor with servo controlled pivot will keep the car away from barriers and let it drive autonomously. The motor driver expansion shield combined with the very powerful Arduino Uno allows for a very functional RC car and for high power output to the motors.
Features
- Learn electronics and coding by building your own RC car with Arduino
- Control up to 4 motors (or 2 stepper motors) with the Arduino Shield
- 2 Servo motors can be attached to the shield for convenient cable management
- Hook up normal batteries or LiPo batteries for higher speed
- Attach more sensors and modules to the acrylic plate for endless project possibilities.
Technical
- 2x l298n chip
- 130 RPM servo rotation speed
- 8 kph max speed
Contents
- 2WD RC car chassis
- UNOR3 Development Board Improved Version
- Ultrasonic Sensor HC-SR04
- 2-Axis FPV Original Special Nylon PTZ for SG90 Servo
- SG90 180 Degrees9G Micro Servo Motor
- 10 * 20cm Female to Female 40Pin Solderless Jumper Breadboard Wires
- L293D Motor Drive Shield Expansion Board
Daniel (verified owner) –
Some pins were slightly curved. The rest was good
Rhiana Pollard (verified owner) –
Some wires we bad
Patrick Truong (verified owner) –
I had on LED that didn’t work the rest worked perfectly
Lola-Rose Ramsay (verified owner) –
Arduino worked like a charm and the other components as well. Some pins were not curved but they still worked.
AllenCoopers_3 –
Really a great kit to build an RC car with. The only thing I did not like was that it was very hard to build the HR-SR04 mount.